EC2 Evo Enamel Wire Stripper:

The EC2 Enamel/Magnet Wire Stripper will strip many film insulations including Enamel, Varnish, Formvar, MI etc for a range of wire sizes between 29 AWG (0.28mm O.D.) and 8 AWG (3.25mm O.D.). Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed. The insert in the EC2 Magnet Wire Stripper is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

EC2 Enamel Wire Stripping Machine Operation – Simple Setup & Stripping Operation:

1. Loosen the Chuck Assembly with the two wrenches provided.
2. Place Stripping Insert into the chuck and hand tighten.
3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
4. Remove the work piece and start the EC2.
5. Strip the wire by pushing into the Stripping Insert and remove to examine.
6. If insulation is not completely removed, switch of EC2, tighten Chuck Assembly and repeat stripping operation.